Peparing the Dana 30 for the front of Scuffy II
Lifted Jeep Cherokee
Scuffy II is getting the ARB I bought a while back. It is already installed in a Dana 30 front axle. The axle has late model knuckles that were damaged so my plan is to swap on the old knuckles from the existing front axle.
When I pulled the axle shafts they look quit a bit beefier than what I remembered a Dana 30 looking like. These may be some heavy duty axles. Nice bonus if that is the case.
Since I plan to use stock lower control arms, I clearanced the arm pockets adn shock mounts to get a little more drop before the arms hit.
See before and after pics below.
Bookmarkz
Scuffy II is getting the ARB I bought a while back. It is already installed in a Dana 30 front axle. The axle has late model knuckles that were damaged so my plan is to swap on the old knuckles from the existing front axle.
When I pulled the axle shafts they look quit a bit beefier than what I remembered a Dana 30 looking like. These may be some heavy duty axles. Nice bonus if that is the case.
Since I plan to use stock lower control arms, I clearanced the arm pockets adn shock mounts to get a little more drop before the arms hit.
See before and after pics below.
Bookmarkz
posted by Mike at 10:29 PM
0 Comments:
Post a Comment
<< Home